Coffee grinders > Gaggia

The Profitec E61 Flow Control Device is an innovative accessory designed to give you precise control over the water flow during espresso extraction. Compatible with E61 group heads, this device allows you to manually adjust the flow rate, enabling you to experiment with different profiles and achieve the perfect extraction for each type of coffee. The flow control device is easy to install and use, making it a great addition for baristas who want to take their espresso-making to the next level. With the Profitec E61 Flow Control Device, you can fine-tune your espresso shots for optimal flavor and aroma.

If you want the best compromise between performance and everyday usability, this is the coffee grinder for you. Powered by a whopping 800-watt motor at 1400 rpm, this coffee grinder’s performance matches the ones of the top performance professional coffee grinders. However, it is shorter and narrower compared to those which makes it very handy in small kitchens. Despite the size, you will find Eureka’s latest technologies inside. To begin with, there is the ACE system or Anti-Clumping Electrostaticity, also known most simply as the anti-clump system. By eliminating the electric charge in the ground coffee the system avoids the formation of clumps and leaves your kitchen cleaner. The regulation of the doses is straightforward thanks to the single, double and manual programming through the use of simple +/- buttons fitted below the display. Press the * button in the middle and you will enter a manual mode for personalized

Technical Data: • Heat exchanger system • E61 brew group with stainless steel mushroom • 3 preset modes for water and steam temperature • Switchable preinfusion • ECO mode • Adjustable expansion valve • Dual gauge for boiler and pump pressure • 1.6 l stainless steel boiler • Stainless steel heating element • Boiler insulation • Vibration pump • 2.8 l water tank with built-in adapter • Automatic low water volume shut-off • Low-wear rotary valves • High-quality steam and hot water wands • Removable cup tray • Bracket for the blind filter underneath drip tray • Different colored valve disclets included • Power usage EU, UK, CH, AU: 230V/1400 W US: 115 V/1400 W • Weight 21.5 kg • Dimensions (WxDxH): 228 x 448 x 372 mm without portafilter 228 x 558 x 372 mm with portafilter Included with the machine: 1 portafilter 1 spout 1 portafilter 2 spouts

Key specifications Engine power 630 W Turns per minute 1.310 rpm Ø Strawberries 83 mm Espresso point production 4.2 g/s Hopper capacity 1,250 g Height x width x depth 600 x 230 x 385 mm Net weight 15.36 Kg Key Features Parallel System micrometric regulation Direct access to the grinding chamber Coffee outlet with LED lighting Engine with fan Height and depth adjustable fork Refill button on the front Electronic characteristics 2.8” High Tech Touch Screen Multilingual display Portafilter Detector Password protection for menu access Total and partial coffee counter Wear warning and changing of cutters Screensaver Wireless Firmware Update 630 W motor with fan at 1,310 rpm Powerful motor with fan that allows you to work non-stop in high demand situations, keeping the properties of the coffee unchanged. Flat burrs 83 mm Made of highly durable tempered steel (100Cr6). Guarantees a precise particle size for Espresso and spectacular productivity.

If you look at Pro 600 you would think its the same as a Pro 700. In all fairness on the exterior, it does have the same E61 group, PID system, steam wand, and hot water wands. In fact, apart from a slightly more compact size, the only real unique feature to this machine is the black finish in the side panels. Even in the inside, you get the same brew boiler you found in the Pro 700 with a capacity of 0.75 L. Where are the differences then? The main differences lie inside of the machine, for instance, the steam boiler has a capacity of 1 L and a vibration pump has been fitted instead. Despite these small downgrades, the machine has still plenty of things to make up with. The PID system allows for extremely precise regulations of the temperature and you get a shot-timer integrated as well.

If you look at Pro 600 you would think its the same as a Pro 700. In all fairness on the exterior, it does have the same E61 group, PID system, steam wand, and hot water wands. In fact, apart from a slightly more compact size, the only real unique feature to this machine is the black finish in the side panels. Even in the inside, you get the same brew boiler you found in the Pro 700 with a capacity of 0.75 L. Where are the differences then? The main differences lie inside of the machine, for instance, the steam boiler has a capacity of 1 L and a vibration pump has been fitted instead. Despite these small downgrades, the machine has still plenty of things to make up with. The PID system allows for extremely precise regulations of the temperature and you get a shot-timer integrated as well.

TECHNICAL DATA Dipper (one-circuit) system Heavy duty lever brew group (7.8 kg) Handles of the hand lever, lever valves and portafilters handcrafted American walnut Practical lever valves for steam and hot water extraction Large, pine green boiler pressure gauge PID control for regulating the boiler temperature Programmable ECO-Mode Switchable from water tank to a fixed water connection Connection to a water drainage is possible The vibration pump is only activated when using the water tank The vibration pump is not activated when using a fixed water connection 3.5 l copper boiler 2.8 l water tank with built-in adapter Drip tray with about a 1.25 l capacity High quality steam and hot water pipes A large removable cup tray Power usage EU, UK, CH, AU: 230V/1600 W US: 115 V/1500 W Weight: 35.5kg Dimensions (WxDxH): 339 x 505 x 492 mm without portafilter 339 x 593 x 740 mm with portafilter